Dorgard is a device designed to safely hold open a fire door and
automatically release the fire doors upon the sound of a fire alarm.
It can be used to hold the fire door open in any position.
We stock all four DORGARD colours available; Red, White, Black and Brown for the same price.

Unlike electro-magnetic retainers (EMR), Dorgard requires no
wiring as it is battery operated and self-contained. Installation is
easy, quick and non-disruptive. The Dorgard is affixed to your fire
door with four screws and takes approximately 5 minutes to install.

Once you have inserted two C-size batteries (supplied), Dorgard is ready for duty.
When Dorgard is holding open a fire door it listens for a continuous
fire alarm sound level of over 65 decibels. After approximately 14
seconds Dorgard will release, allowing the fire door toclose under
the pressure of the overhead door closure.

Operating Dorgard
To hold the door open
1. Open the door to the required ‘hold open’ position, or open fully
against the bump stop of the floor plate (if fitted).
2. Stand sideways to the door.
3. Press the black knob down using your foot. Greater foot
pressure may be needed depending upon force from the door
closer or the type of floor surface.
4. Whilst depressing the black knob pull the door gently in the
direction of closing.
5. Remove your foot and let go of the door.
To release Dorgard manually
1. Lightly kick the black knob toward the door.
2. Or push the door in the direction of opening. Dorgard can only
be released by kicking the black plunger knob if a floorplate is installed.

Dorgard Applications
Dorgard is ideally suited to hotels, office buildings, guest houses
and any buildings where hard wiring door release mechanisms is
not an option.
Dorgard is easy to install and will help you meet the fire
regulations without having to fit an expensive and intrusive
alternative. Dorgard installs in under 5 minutes!